Infiniti G37 Sedan

 Met up with Max to get his front fenders rolled flat and slightly pull it to fit some beefy 19x11 wheels. The rear was rolled by another guy and he did a horrible job just to get a quick buck =(
Anyways this car looks dope standing still and while rolling.

Volkswagen R32

On this R32 it just needs a slight roll upfront to remedy the slight rubbing during turns.
It's pretty straight forward job just takes sometime since the inner lip is uber small.

Mazda RX-7

Worked on this RX-7 few weeks ago it needed the front fenders rolled badly. The paint was cracking due to constant rubbing and the inner lip was being pulled out. The Owner wanted it rolled flat. Not a Problem!

Acura TL

After getting a good deal on some wheels and tires the owner of this TL decided to get his fenders rolled. I was recommended by his co-worker that had his rolled previously.

Rear wheels are rubbing on the fenders and the inner lip was being pulled out.

BMW 5-Series

This BMW just needs a basic roll and fix the pulled inner lip on the driverside rear.
Owner wanted a slight pull to clear beefier tires in the future

Infiniti G35 Coupe

For my 2nd appointment last Sunday David came by with his G35 coupe to get the rear fenders rolled. He changed to a bigger sized tire and it was rubbing slightly. Just needs a mild roll to clear it when going over dips on the freeway.

Porsche 911 Carerra

My first appointment last sunday was Regie and his Porsche 911 Carrera. The rear tires was shredding due to the inner lip constantly hitting it.  It just needs a rear roll to clear the 19x11 305/30 tires

Due to the beefy and wide wheel/tire combo it pulled the inner fender out

Before and after picture of the driverside

DONE!!!

Honda S2000

Met up with brad to get his fenders rolled to hopefully fit his new wheels. It's a bit aggressive for the car without having proper adjustable camber arms

BMW 550i

Met up with David and his BMW 550i that needs a roll front and back. The tire was rubbing on the fenders after putting some 25mm spacers. I needed to trim the inner fender liner to properly roll the back

The tire slightly pulled the inner fender lip out as you can see from the pictures.

Acura TSX

For my second appointment for the day Steven came over with his TSX and his friend. The car needs a roll in the back and front to accommodate his new SSR SP1 wheels.

Infiniti G35 Coupe

For my first car of the day I met up with mike and his G35 coupe. It just needs a basic roll in the rear so he can run some spacers.