Subaru WRX Wagon

Met with Austen and his Subaru WRX wagon this morning to fix his rubbing issue with his front fenders. Both sides of the inner fender lip was pulled out and needed to be folded in again then rolled flat.  Using the roller for the front will always give the front fenders a slight pull. Unfortunately the paint on the passenger side has stress cracks already and eventually cracked when it was rolled. The owner was aware of this before staring the job. Some touch up paint will hide this cracks and help with rust build up. Driverside inner fender lip was pulled really bad but still managed to put it back without any damage.

Before

AFTER (Passengerside)

BEFORE

Clamped back in and ready to roll

AFTER

BMW 3 Series E46

My second appointment for today is Hung and his BMW 3 series. This is a bit complicated since there is a rubber protector inside the fenders. It's a bit of a PITA to remove so hung decided to just get the fenders shaved.

Infiniti G35 Sedan

Met up with Justin and his GF today to get his G35 sedan rolled. Only needs the rears rolled to get it ready for full Coilover suspension and wheels.

DONE!!!

Lexus IS300

Today I met up with Loc and his Lexus IS300. The fenders was rolled previosly by someone else and he just wanted a slight pull to get rid  of the rubbing.

Nissan 350Z

On my 3rd straight day rolling fenders I met up with ricky and his 350z. It just needs a basic roll in the rears to clear some space for beefy tires in the near future.

Infiniti G35 Sedan

Meeting up with a previous customer today to sort out his fenders. Specs on the wheels is a bit aggressive for the car so it needed a slight pull due to the rim rubbing on the edge. The driverside rear fender slightly buckled and needs to be straighten out and pulled.

All Done!! So Sick rolling!

BMW Z4

The car for today is a 2007 BMW Z4 owned by Hai. He contacted me about getting his fenders rolled due to slight rubbing on the rear. Just needs a basic roll on both side to prevent rubbing.

Driverside DONE

Lexus IS250

        Met up with James and his son today to get his fender's rolled. He just wants a basic roll so he has enough space to clear his current and future wheel set up. The car is on stock suspension at the moment but it will have an overhaul in the near future.